Apex...

Motorized Test Stands

ESM303-003 Safety Shield For ESM303 Test Stand


The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator.
The shield is constructed of rugged PETG material.
It rotates via ultra-smooth bearings in both the clockwise and counter-clockwise directions, guided into the open or closed positions with magnetic detents.
An electrical interlock prevents test stand operation while the door is open.
For crosshead adjustment during sample loading, the FollowMe™ force-based positioning function is active even while the door is open.
The FollowMe™ function is included with the shield and does not need to be separately ordered with the test stand.

Compatibility Note:

FollowMeTM may be used in all new ESM303 test stands and existing ESM303 test stands with the following minimum firmware versions:

Front: 2.02.08
Main: 2.02.07

With earlier firmware versions, the door interlock is still operational, however, FollowMeTM cannot be activated while the door is open. Test stand firmware upgrades are available at no charge. Contact Mark-10 for details.

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The MH-500 motorized test stand offers consistent and reliable testing. Our Basic or Auto Cycle models are available in Standard, High, and Low speed ...
MH-500 Motorized Horizontal Test Stand
Click image for more info