Motorized Test Stands

ESM303H High Performance Motorized Test Stands


The ESM303H is a highly configurable horizontal force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments.
Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning – using your hand as your guide, push and pull on the load cell to move the crosshead at a variable rate of speed.

With generous travel, clearance, and depth dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, load-holding, elongation testing, tensile testing, compression testing, and more.
Satisfy various test methods through an easy-to-use menu, allowing the configuration of test speed, force and distance limits, cycling, preload, and many other functions, all protected by a password. Save up to 50 profiles to accommodate a range of test methods.

When the ESM303H’s clearance is insufficient for the application, its modular mechanical design allows for frame extensions. Modularity extends to the controller functions as well.
Individual functions, such as travel measurement, cycling, load-holding, etc., may be purchased either upfront or enabled in the field through an activation code.
This a-la-carte platform allows for custom configuration as appropriate for the application and budget.
Collect force and travel data, plot and analyze the results, and control test stand motion via PC-based MESUR™gauge Plus software.
Or, fully control the stand by a PC through a custom-written program in any language supporting ASCII communications.

For more details, please contact us for Pricing and Availability..11

Features

  • Selectable speed setting.
  • Right and left travel limit switches.
  • Adjustable, removable control panel may be mounted to the left or right end of the frame.
  • Password protection of test parameters.
  • Stepper motor-driven, producing smooth and quiet operation with no speed variation under load.
  • USB output of force or force vs. travel.
  • Compact footprint, suitable for crowded work benches.
  • Ergonomic design, with smart, clean cable management.
  • Integrated electronics assembly, easily removed and transported for service.
  • Adjustable mounting plate with T-slot base.

Specifications

Load capacity 300 lbF (1.5 kN) @ up to 24 in/min (610 mm/min) / 200 lbF (1 kN) @ >24 in/min (610 mm/min)
Maximum travel distance 18.0 in (457 mm)
Speed range Standard: 0.5 - 13 in/min (13 - 330 mm/min) / Optional: 0.02 - 45 in/min (0.5 - 1,100 mm/min)
Speed setting accuracy ±0.2% of setting
Speed variation with load ±0% (stepper motor driven)
Travel resolution 0.001 in / 0.02 mm
Limit switch repeatability 0.001 in (0.03 mm)
Power Universal input 80-240 VAC, 50/60 Hz
Weight 62.5 lb (28.4 kg)
Warranty 3 years

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info