Motorized Test Stands

MH-275 Motorized Horizontal Test Stand


The new MH-275 motorized test stand is designed for tension, compression, and friction testing. A combination of a screw system and the state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Speed control, quick return, and emergency stop are standard features.

The MH-275 accepts the DPS, Z2 & ZP force gauges, additional models require the AP-002 adapter plate.

High/Low Setpoint Force Control
When the force value reaches the Low setpoint, force control is activated to hold the tension or compression force between the High and Low setpoints programmed on the Imada Z Series force gauge. Use the optional digital timer to program the duration of the hold, up to 100 minutes in 1second increments. Ideal for non-destructive testing.

High Setpoint Force Control
When the force value reaches the Low setpoint, speed is reduced to the test speed set by the Speed Adjust Knob, and when the tension or compression force value reaches the High setpoint programmed on the Imada Z Series force gauge, the test stops. Ideal for creep testing.

Speed control, quick return, and emergency stop are standard features. The MH-275 accepts any of the standard range Imada force gauges.
Optional timer and digital distance meter available.

Models Available

MH-275 – With Auto Cycle & Force Control
MH-275-S – With Auto Cycle, Force Control & Distance Meter

*FORCE GAUGE NOT INCLUDED
Designed to work with the DPS, Z2 & ZP force gauges.

For more details, please contact us for Pricing and Availability..!!

Features

  • One stand for both compression (push) and tension (pull) tests.
  • Jog, Single Cycle, Continuous Cycle(72 hour max.), Force Control.
  • Digital Distance Meter Optional.
  • No programming required.
  • Combination of screw drive system and high performance brush-less motor provides extremely smooth and powerful operation over the entire speed range.
  • Conditional Overload Prevention.

Specifications

Capacity 275 lbs / 125 Kg / 1250 N
Stroke 11.2" / 285 mm
Weight 31 lbs / 14 Kg
Compatible Gauges DS2, Z2 and ZP
Warranty 2 Years

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info