Motorized Test Stands

MH-500 Motorized Horizontal Test Stand


The MH-500 motorized test stand offers consistent and reliable testing.
Our Basic or Auto Cycle models are available in Standard, High, and Low speeds.
Speed control, quick return, and emergency stop are standard features.
They accept any of the standard range Imada force gauges and special attachments.
Optional digital distance meter is also available.

Basic Model: MH-500BA
Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the crosshead up to the top travel limit at the selected speed. Flip the direction switch down to send the crosshead down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.

Auto Cycle Model: MH-500AC
Autocycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return, and Emergency Stop features are also included. These stands have three function modes.

Manual Mode:
While the Direction switch is held up, the head moves up. Holding the switch down moves the crosshead down. When the switch is released the head stops. This mode is ideal for positioning.

Single Cycle Mode:
When the Direction switch is pushed up, the crosshead moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.

Auto Cycle Mode:
This mode is similar to Single Cycle mode, except that the crosshead travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.

Models Available
MH-500-BA
MH-500-BA Motorized Horizontal Test Stand, Basic Model
MH-500-AC
MH-500-AC Motorized Horizontal Test Stand, Auto Cycle

Features

  • Stroke: 12"
  • Digital Distance Meter Optional.

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info