Motorized Test Stands

MX-110 Motorized Vertical Test Stand


The new MX-110 test stand offers consistent and reliable testing. The combination of a screw drive system and the state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Connect The MX-110 test stand with a Z Series force gauge and enable force controlled testing.
Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z Series force gauge, or maintain the force between the Z Series High and Low setpoints.
Force control is ideal for fatigue or non-destructive testing.
The MX-110 accepts any of the standard range force gauges.
A quick switch and Emergency Stop features are also included.

Capacities Available

MX-110
Motorized Test Stand, Capacity: 110 lb / 50 Kg / 500N, Speed: 0.4 – 11.5 in/min
MX-110-F
Motorized Test Stand, Capacity: 80 lb / 36 Kg / 360N, Speed: 0.8 – 23.0 in/min
MX-110-WF
Motorized Test Stand, Capacity: 40 lb / 18 Kg / 180N, Speed: 1.6 – 47.0 in/min
MX-110S
MX-110S Motorized Test Stand w/Distance Meter
MX-110S-HS
MX-110S-HS Motorized Test Stand w/Distance Meter

*FORCE GAUGE NOT INCLUDED
Designed to work with the Z2 & ZP force gauges.

For more details, please contact us for Pricing and Availability..!!

Features

  • One stand for both compression (push) and tension (pull) tests.
  • Force Controlled operation with ZTA force gauges.
  • Jog, Single Cycle, Continuous Cycle, Force Control.
  • Maximum clearance 9" (with extender 14").

Specifications

Capacity 110lbs / 50Kg
Travel Rate Refer to Ordering Guide above
Dimensions Refer to Dimensions above
Compatible Gauges Z2, ZP and DS2
Warranty 2 years

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info