Motorized Test Stands

MX-275 Motorized Vertical Test Stand


The new MX-275 motorized test stands offer advanced force testing. The combination of a screw drive system and the state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Connect the MX-275 test stand with a Z2 or ZP Series force gauge and enable force controlled testing.

High/Low Set Point Force Control
Force control is activated when the applied force is at or between the high and low setpoint(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.

One Way Force Control
Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.

Speed control, quick switch, and emergency stop are standard features.
Optional timer and digital distance meter available.

Models Available

MX-275
MX-275 Motorized Vertical Test Stand
MX-275S
MX-275S Motorized Vertical Test Stand with Distance Meter

*FORCE GAUGE NOT INCLUDED
Designed to work with the Z2 & ZP force gauges.

For more details, please contact us for Pricing and Availability..!!

Features

  • One stand for both compression (push) and tension (pull) tests.
  • Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control.
  • Clearance 16".
  • Force Controlled operation with ZP & Z2 Series force gauges.
  • Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
  • Wide speed range: 0.4 – 9.4 in/min (optional speed ranges available).
  • Optional timer and digital distance meter.

Specifications

Capacity 275 lbs / 125 Kg
Travel Rate 0.4 - 9.4 in/min
Compatible Gauges ZP, Z2 and DS2
Warranty 2 years

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info