Motorized Test Stands

MX2 High Performance Motorized Test Stand

High Performance, Force Control, Motorized Test Stand with Speed Control, Timer & Cycle Counter
MX2 Vertical Motorized Test Stands used maintenance-free, brushless, DC motors that provide a smooth and powerful operation to ensure consistent force testing results.
FA High Precision Distance Measuring Option records distance traveled directly on the ZTA force gauge for high-speed Force VS Distance measuring.

Precise Increment Mode
MX2 features a unique jog movement control, for precise increment testing.
In jog mode, each click of the program dial moves the crosshead approximately .015mm for MX2-110, .01mm for MX2-275, and .05mm for MX2-550 (standard speed, under no load).

Cycle Mode
MX2 Program dial and LCD interface In cycle mode, automated fatigue tests are easy to setup.
Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units, and cycles.
Control start and return speeds independently.

Force Control
Force controlled non-destructive tests are also easy to set up and program.
Connect a Z Series force gauge to the MX2 test stand to enable the following force-controlled tests and Conditional Overload Prevention.

Maintain Force Between High/Low Setpoints
Initial cross head speed is controlled by the start speed setting.
Force control activates when the applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge.
The crosshead maintains that force for the programmed interval and then uses return speed to reset for the next cycle.

Increase Force to High Setpoint and Stop
Initial cross head speed is controlled by the start speed setting.
When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge.
Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached.

3 Capacities Available
MX2-110 – 110 lbs / 50 Kg / 500 N
MX2-275 – 275 lbs / 125 Kg / 1250 N
MX2-550 – 550 lbs / 250 Kg / 2500 N

For more details, please contact us for Pricing and Availability..!!


  • Ultra rigid, .5mm deflection at maximum load.
  • Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectable.
  • Easy-to-use program dial and menu screens control mode, speed, timer and cycles.
  • Programmable timer up to 99' 59.9 sec in 0.1 sec increments.
  • One stand for both compression (push) and tension (pull) tests.
  • Wide speed range: 0.4 – 11.8 in/min (optional speed ranges available).
  • Force Controlled operation with Imada Z Series force gauges.
  • Optional digital distance meter available.
  • Conditional Overload Prevention.
  • Max clearance 9" (with extender 14").


Capacity MX2-110: 110 lbs / 50 Kg / 500 N, MX2-275: 275 lbs / 125 Kg / 1250 N, MX2-550: 550 lbs / 250 Kg / 2500 N
Stroke MX2-110: 9.4 In / 240mm, MX2-275: 12.2 In / 310mm, MX2-550: 12.2 In / 310mm
Minimum Travel In Jog Mode MX2-110: 0.015mm, MX2-275: 0.010mm, MX2-550: 0.050mm
Compatible Gauges ZTA and DST
Distance Meter Range S Version: 8" S12 Version: 12"

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info