Durometer Testers

Asker X Durometer


Asker Hardness testers feature portable design, ease of operation, non-destructive measurement, and optional peak indicators. Supplied with 3 points NIST traceable calibration cert.

Models Available

Model F & Model FP
Exclusive type for foam materials, allowing measurement by placing the tester on the object of measurement. In addition to Model F, Model FP is available for powder puff.

Model C & Model C2
Model C is intended for hardness measurement of Soft Rubber, sponge, foamed elastomers, wound threads(yarn package), rolled films, potter’s clay(kaolin), and other such soft materials.
For even softer materials, Model C2 is available.

Model CS
This features a larger indentor and a more strong spring compared to Model C, thereby making it more suitable for polystyrene foam.

Model A
Has been used for wide applications since being standardized in the ISO.

Model JAL
Especially useful for recessed and/or smaller measurement areas. In addition to the standard Model JAL, long presser foot types are available for other Model applications.

Model B
It uses the same spring load used in Model A. It adopts a conical indentor similar to that of Model D, so as to be applicable to harder measuring objects than can be measured by Model A. It is useful for hardness measurement of unglazed pottery clay and ceramics in green condition.

Model JC
Model JC has those hardness testers described in JIS K 6301 as ‘suitable for samples found to have a hardness value above 70 according to Model A’. It features a higher resolution for hardness measurement of hard rubber.

Model D
Similar to Model A, this model is defined as ‘Durometer Type D’ as described in various domestic and international standards. It is in widespread use for hardness measurement of plastics and hard rubber.

For more info Please Request a quote now..!!

Features

  • Supplied with NIST Traceable Calibration Certificate (ISO 17025 Optional).
  • High performance and accuracy.

Specefications

Indication Range 262 degree dial scale
Minimum indication 1 point (Accuracy : ±1 point)
Pressure foot Dimensions 44 x 18mm Rectangular
Outer Dimensions Approx. 57 x 30 x 76 mm (W x D x H)
Mounting Thread M6 P1
Weight 200 grams

Related Products

1500 Vernier Durometer With its lightweight and small size, the user can carry the QC at all times. Should it be dropped, even if not in its leather c ...
QC 1500 Vernier Durometer
Click image for more info
The Digital Complete O-Ring Hardness Kit is the most convenient and accurate way to perform repeatable hardness (durometer) testing on thin materials ...
OTK-DG Digital O-Ring Durometer Kit
Click image for more info
EMS4 Remote Readout Data Collection App Model RX-DD Digital Durometer has the capability of communicating over USB with this data collection syste ...
EMS4 Remote Readout Data Collection App
Click image for more info
For the technician that must perform hardness tests on various types of non-metallic materials, we offer the Multi-Scale durometer test kit. The Mu ...
RX-DD-MS Digital Multi-Scale Durometer
Click image for more info