Proximity Sensors

SE-G2 Proximity Sensor

The SE-G2 (formerly SE-G) is a solid-state proximity switch designed for gear sensing. The SE-G2 gear sensor will provide a square wave signal output and indicate detection via an LED indicator on the rear of the unit.

The maximum switching frequency is 8 kHz with a maximum sensing distance of 1.0 mm, the gear pitch must be between 25.4 (min) and 16.93 (max).

Please contact us for pricing and availability..!!


  • Square wave output.
  • 18" (0.46 m) cable included.
  • 0.04" (1 mm) sensing distance.
  • LED indication.


Power (VCC) + 8.5v – 16 VDC
Sink Current 40 mA maximum
Output Signal High Level (VCC – 1.1) ± 10%
Output Signal Low Level 0.4v or less
Output Power 50 mA
Duty Cycle 25 – 75%
Output Impedance 2.2 kΩ

Related Products

The DT-5TXR Panel Mount Tachometer with optional output Modules is an economical unit for speed and process time monitoring when combined with a compa ...
DT-5TXR Panel Mount Tachometer
Click image for more info
The DT-501X Panel Meter Tachometer with optional outputs is a multi-faceted instrument ideally designed for speed, rate, or time monitoring applicatio ...
DT-501X Panel Meter Tachometer
Click image for more info
MiniVLS 313 USB Laser Speed Sensor / Tachometer The MiniVLS 313 is a laser speed sensor with USB output for sending data directly to a PC or Androi ...
MiniVLS 313 USB Laser Speed Sensor / Tachometer
Click image for more info
The MiniVLS 211/ia Intrinsically Safe Optical Speed Sensor has is Ex-II 1G Ex ia op is IIC T4 Ga (-20°C < Ta < +40°C) certified. The certif ...
MiniVLS 211/ia
Click image for more info