Motorized Test Stands

TSTM-DC Motorized Torque Test Stand


The TSTM-DC Advanced Motorized Torque Test Stand offers all the mechanical specifications of the TSTM motorized test stand, including standard 100 lbFin (11.5 Nm) torque capacity, versatile modular design, quick engagement and disengagement of samples, fixture mounting plate, stepper motor design that prevents speed variation with load, and more. A 200 lbFin (22 Nm) capacity upgrade is available as an option.

The TSTM-DC offers expanded capabilities, including full PC control, programmable angle limits, programmable cycling, auto return, password protection, and other features.

Models Available

TSTM-DC
Motorized Torque Test Stand – Vertical with digital speed controller – Vertical
TSTMH-DC
Motorized Torque Test Stand – Vertical with digital speed controller – Horizontal
EU-PLUG
Euro type plug supplied in place of USA type plug

For more details, please contact us for Pricing and Availability..!!

Features

  • Digital Angle Indication; Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.
  • Programmable Angle Limits; The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.
  • Overload Protection; Protects the torque sensor against overload (requires a Model 7i or 5i force/torque indicator and 09-1162 multi-function cable). The user programs the desired percentage of full scale of the sensor.
  • Auto-return; The torque table rotates to an angle limit or torque set point (requires a Model 7i or 5i force/torque indicator and 09-1162 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.
  • Cycling / Dwell Time; Same as auto-return, but with the ability to program up to 100,000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10,000 seconds. Independent CW and CCW speeds may be programmed.
  • Programmable Button Functions; Programmable CW and CCW button functions - momentary motion, maintained motion, or auto.
  • Independent CW and CCW Speeds; Configurable speeds for CW and CCW directions.
  • Selectable speed units of measurement (RPM and °/s)
  • Password protection; Prevents unauthorized changes to controller settings.
  • Computer Control; An RS-232 port is provided to interface with a PC. A command set is provided to allow for full control from a PC.

Specifications

Maximum Load Standard: 100 lbFin [11.5 Nm] Optional: 200 lbFin [22.0 Nm]
Speed Range Standard: 0.01 - 15 RPM [0.05 - 90°/s] Optional: 0.04 - 60 RPM [0.2 - 360°/s] *
Speed Accuracy +/-0.2% of setting, +/-0% variation with load
Rotational travel accuracy +/-0.7° / 0.02 rev.
Rotational travel repeatability 0.1° / 0.01 rev.
Rotational travel resolution 0.1° / 0.01 rev.
Throat 4.10" [104 mm]
Maximum slider travel 15.5" [394 mm]
Slider travel rate 1.047" [26.6 mm] / lever rev
Universal power supply 80-250 VAC

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info