Mechanical Force Gauges

X-C Mechanical Force Gauge with Hardened Ball


The Model X-C is available in nine capacities from 50 lb to 25,000 lb or 50 kg to 10,000 kg. Accuracy is ±1% of the full range.
The load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases.
The ball is held in place with a spring clip or retainer.
A threaded mounting hole is located opposite the loading ball at the bottom of the beam.
Proven accuracy and ruggedness sets our mechanical force gauge apart in the force measurement industry.
The “D” shaped deflection beam is the heart of the X-C.
Highly engineered materials with close machining tolerances and proper heat treatment provide optimum strength and spring characteristics.

Capacities Available

30386-0035
X-C Mechanical Force Gauge Compression, 50lb Capacity
30386-0043
X-C Mechanical Force Gauge Compression, 100lb Capacity
30446-0033
X-C Mechanical Force Gauge Tension/Compression, 250lb Capacity
30446-0017
X-C Mechanical Force Gauge Compression, 500lb Capacity
30444-0019
X-C Mechanical Force Gauge Compression, 1,000lb Capacity
30388-0017
X-C Mechanical Force Gauge Compression, 2,000lb Capacity
30389-0016
X-C Mechanical Force Gauge Compression, 5,000lb Capacity
30423-0014
X-C Mechanical Force Gauge Compression, 10,000lb Capacity
30449-0014
X-C Mechanical Force Gauge Compression, 25,000lb Capacity

For more details, please contact us for Pricing and Availability..!!

Features

  • Calibration is available in pounds or kilograms.
  • NIST Traceable Calibration Certificate is included.
  • 24-month Limited Manufacturer's Warranty.

Specifications

Warranty 2 Years
Accuracy ±1% Model 30449-0014: ±2%
Operating Temperature up to 120°F (48°C)
Overload rating Accidental overloads up to 30% of capacity can be safely sustained without injury to the dial indicator or deflection beam. All capacities feature a 5:1 design safety factor.

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info