Mechanical Force Gauges

X-PP Tension and compression Force Gauge


X-PP Force gauges calibrated in push-pull are available in four capacities in pounds ranging from 50 lb up to and including 2,500-0-2,500 lb and three metric capacities from 50 to 1,000 kg.

Accuracy is ±2% of maximum dial reading (based upon total capacity of both compression and tension scales).
Force is applied to connectors through a hardened steel pin which must be slip fit in connector holes.
2,500 lb and 1,000 kg capacity gauges are equipped with two shackle adapters, shackles, and pins.
Shackles must be removed when the compression load is involved. Force is then applied against shackle pins in a suitable test setup.
All push-pull gauges are supplied with a compression-loading spherical ball fitting for compression loading.

Capacities Available

30795-0014
X-PP Push Pull Force Gauge – 50-0-50 lb Capacity
30796-0013
X-PP Push Pull Force Gauge – 125-0-125 lb Capacity
30798-0011
X-PP Push Pull Force Gauge – 500-0-500 lb Capacity
30800-0017
X-PP Push Pull Force Gauge – 2,500-0-2,500 lb Capacity
30796-0021
X-PP Push Pull Force Gauge – 50-0-50 kg Capacity
30798-0029
X-PP Push Pull Force Gauge – 250-0-250 kg Capacity
30800-0025
X-PP Push Pull Force Gauge – 1,000-0-1,000 kg Capacity

For more details, please contact us for Pricing and Availability..!!

Features

  • NIST Traceable Calibration Certificate is included.
  • 24-month Limited Manufacturer's Warranty.

Specifications

Warranty 2 Years
Accuracy ±2%
Operating Temperature up to 120°F (48°C)
Overload rating Accidental overloads up to 30% of capacity can be safely sustained without injury to the dial indicator or deflection beam. All capacities feature a 5:1 design safety factor.

Related Products

Perform quick and accurate 90-degree peel tests with our test fixtures. Models Available GT-30-1-LF - For testing from 0-44 lbf GT-30-1 - For t ...
GT-30-1 90 Degree Peel Test Fixture
Click image for more info
P45-50N 45 Degree Peel Tester can measure the peak value of the beginning of the opening cover. Peeling strength of a film cover of the plastic con ...
P45-50N 45 Degree Peel Tester
Click image for more info
The G1109 peel test fixture is designed for peel testing of tapes, films, foil seals, and other materials. A large, flat working table moves horizonta ...
G1109 90° Peel Test Fixture
Click image for more info
The ESM303-003 safety shield attaches to an ESM303 test stand, providing pinch and sample debris protection for the operator. The shield is construct ...
ESM303-003 Safety Shield For ESM303 Test Stand
Click image for more info