GalvanoTest Coulometric coating thickness measurement gauge

The anodic dissolution method, also known as the coulometric method, functions similarly to the electroplating process: an electrolyte separates individual metal coatings from the substrate with the help of an electric current. By measuring the current and time, the GalvanoTest determines the thickness of the separated coating.
Ideally suited to measuring coating thickness in virtually any single or multi-layered coatings. The GalvanoTest uses the coulometric method to measure galvanised coatings such as chrome, nickel, cadmium, copper, brass, silver, gold, tin or zinc both on metals and non-metals.

Models Available

GalvanoTest 2000
the electrolyte is circulated by a pulsator nozzle.

GalvanoTest 3000
large electrolyte volumes circulated by a circulation pump enable quick serial measurements. Suitable for use on very small parts and for the measurement of gold layers.

For more details Please Request a quote now..!!

PoroTest-7 High Voltage Porosity Holiday Detector

Designed for detecting flaws and pores, the PoroTest 7 can be used for non-destructive porosity testing of all insulating coatings on conductive substrates such as steel, aluminium, etc. The test instrument consists of a high voltage probe with an integrated high voltage generator and a test electrode, which is simply connected to the probe. The test voltage control works automatically and is specific to the thickness of the material to be tested and vice versa.

The control unit features a digital display and control pad. The control unit housing is fully portable and made of rugged ABS plastic with an integrated handle. The high voltage probe and control unit are connected via a rugged cable. To detect porosity, the appropriate test voltage specific to the material thickness is set on the control unit which applies, when activated, a spark discharge at the moment a material flaw is detected. In addition to the spark discharge, flaws are indicated by a visible and audible signal and counted. The test voltage is directly indicated on the digital display.

Models Available

P7
0.03 mm – 1.7 mm / 1 mils – 67 mils
P30
0.52 mm – 9.49 mm / 20.5 mils – 373.6 mils
P35
1.4 mm – 11.3 mm / 55 mils – 444 mils

Complete Kit

The PoroTest 7 will be delivered as a kit, including:
Control unit with integrated storage battery
Connecting cable probe-control unit
Metal brush
Grounding cable, 5 m (16 ft) length
Power cable
Shoulder belt
Plastic carrying case
Manual

Typical applications

Testing linings and coatings applied on ducts, pipes, hulls, oil and storage tanks, enamel, paint, rubber and bitumen linings, vessels and tanks, GFK and other plastic materials.

The PoroTest 7 is designed for use with boilers, pumps, tanks and other receptacles, but also for offshore installations, drilling rigs, ships or pipelines.

For more details Please Request a quote now..!!

SmarTest Bluetooth Coating Thickness Sensor

SmarTest is an intelligent wireless coating thickness gauge offering the highest technological standards for non-destructive coating thickness measurement and it relays sensor data via Bluetooth to your tablet, smartphone, or it can be combined with any digital sensor of the MiniTest 745 gauge series.
SmarTest is composed of a Bluetooth adapter that  The new concept of the wireless SmarTest sensor performs all tasks of a professional coating thickness gauge and is available at any time on smartphones and tablets.

The radio sensor SmarTest comes with 16 mm in diameter and 125 mm in length means somewhat it is like a thick ballpoint pen and weighs just 48 g / 1.7 oz. This means that you can carry the SmarTest with you anywhere.

You can connect any SIDSP sensor to SmarTest and cover a wide range of coating thickness measurement tasks.

Comfortable Apps can now turn smartphones and tablets into the effective evaluation and measuring devices. The new SmarTest concept consisting of an app and a wireless sensor offers the perfect solution for measuring coating thickness with the help of smartphones and tablets.
The SmarTest App functions as a device for evaluating and thus replaces a conventional coating thickness gauge.

The App functions include a clear display of current measuring value, statistical evaluation, storage of measuring values in files, 2-point calibration, measuring unit metric/imperial switchover, and export of the series of measurements in the CSV format. All the functionalities of a smartphone are available for data transfer.
For instance, you have the ease of sending your measuring data to any receiver by email. The intelligent SmarTest sensor is made to fit any jacket pocket. In combination with smartphones or tablets, this forms an ultra-modern full-set for experts on-site to measure coating thickness.

Long battery life: the sensor equipped with the LiFePo battery can function for up to 8 hours in continuous operation. Readings exceeding the set limits are indicated on the sensors’ green/red LED. SmarTest functions on old smartphone models as well as on the latest ones. The dual Bluetooth module ensures a long operating time in modern devices thanks to the Bluetooth low energy mode.

SmarTest is a most flexible solution: It can also be supplied in other combinations with any of the SIDSP®-sensors of the MiniTest 700 series to cover a wide field of different applications.

Complete Kit

SmarTest.
Calibration set with calibration foils and reference zero test plate(s).
USB charger with micro-USB cable.
Operating manual.
Manufacturer‘s certificate.
Storage case.

Operation

It is very simple to operate the SmarTest:

Start the SmarTest app on the mobile device.
Switch on the wireless sensor and the Bluetooth connection is established automatically.
Take measurements.

The SmarTest app helps you through all steps with context-sensitive help texts in 4 languages currently.

Application

Non-destructive coating thickness measurement of:

Non-magnetic coatings like varnishes, enamels, chromium, and zinc on ferromagnetic base materials (e.g. steel).

Insulating coatings like varnishes and anodizing aluminium on nonferrous metals (e.g. aluminium, austenitic stainless steel, brass).

Measuring Modes

There are two measuring modes available:

Single value mode
The measurement values are taken individually and displayed. This enables you to take coating thickness values of the object to be measured at multiple points and then to evaluate them statistically.

Continuous mode
After placing the sensor the measuring values are taken continuously and displayed. This mode is suited for calculation of layer thickness distribution on a restricted surface and to locate the thin and thick sections. The measuring values calculated on continuous mode can be saved in the statistics by briefly pressing the power button.

Control / Data Transfer

Sensor control and data transfer of the measuring values is done via Bluetooth 4.0 / Bluetooth Smart (low energy). The sensor and mobile device can be placed about 10 m away from each other, even farther under good transmission conditions.

App Functions

The SmarTest app shows the current measuring values, the statistical evaluation, and helps store control and calibration of the sensor.
There is an option of the metric (μm, mm) and imperial (miles) formats for display and processing of measuring values.
Storage and transfer/download of measuring values is done in the CSV format.

Calibration

Three calibration modes are available:

Manufacturers calibration

1-point calibration on the uncoated object to be measured (zero point calibration)

2-point calibration (zero point calibration + 1 layer/sheet)

For more details Please Request a quote now..!!

SurfaTest Wet film coating thickness gauge

SurfaTest is a wet film coating thickness gauge made of stainless steel with an embossed scale. SurfaTest is ideally suited for the quick and easy measurement of the coating thickness of freshly applied, wet lacquer coatings.

The measuring comb SurfaTest is directly set on a wet lacquer coating upon application of lacquer and both the outer teeth of the measuring comb are thrust into the base.

The thickness of the lacquer coating can be read at 16 measuring points; the wet film thickness is that between the last tooth wet with lacquer and the first dry tooth without lacquer. After use, the measuring comb has to be cleaned with the right solvent.

Thickness gauge made of stainless steel as after use, you can quickly clean the measuring comb with an appropriate solvent.

For more details Please Request a quote now..!!

QuintSonic-7 Ultrasonic Coating Thickness Gauge

The QuintSonic-7 is a Multi-Layer Ultrasonic Coating Thickness Gauge, specially designed for non-destructive coating thickness measurements of paint, varnish, plastics, and other insulation coatings applied on wood, plastics, glass, ceramics, etc. as well as for polymer layers on metals. Up to now, these materials could only be measured destructively.

As a special feature, The QuintSonic 7 measures of up to five coatings in a single operation.

The QuintSonic 7 means problem-free and, above all, precision measurement of typical coating systems such as:

Lacquers on synthetic material.
Synthetic material on wood.
The glass on metal.

Intelligent evaluation of the ultrasonic signal reading means minimal user interference to deliver results that are reproducible. The QuintSonic 7 features a simple calibration and graphic display of test results on an A screen making it a highly versatile gauge that is quick to use.

For more details Please Request a quote now..!!

MiniTest 7400 Coating Thickness Gauge

MiniTest 7400 is a High-precision Coating Thickness Gauge and an indispensable tool for measuring non-magnetic coatings (paint, synthetic material, chrome, etc.) on ferromagnetic substrates (steel), or insulating coatings (lacquer, enamel, synthetic material, etc.) on conductive substrates (aluminum, copper, stainless steel, etc.).

The MiniTest 7400 can take a diverse range of measurements and always gives you readings of the highest precision and enables a wide range of measurements, from the thinnest coatings in the sub-micrometer range (e.g. galvanized coatings) to thick coatings (e.g. flame retardant coatings in steel constructions, rubber coatings, etc.). Measuring objects with difficult geometries (e.g. the measurement of steel pins, or in recesses and holes, etc.) is also no problem for the MiniTest 7400.

A five-point-calibration of the sensors ensures very precise measurements.

SIDSP sensors feature high levels of accuracy and are also extremely durable, easily withstanding years of use even on rough surfaces. Each sensor is equipped with 50 calibration points to correct even the smallest deviation.

The intuitive menu control of the MiniTest 7400 allows for high ease of use. For difficult measuring tasks, the integrated configuration assistant simplifies the calibration and parameter settings. The MiniTest 7400 is supplied with the MSoft 7 Professional PC software package, which can help evaluate and export data in various formats (text documents, Excel spreadsheets, PDF) to your PC.

For more details Please Request a quote now..!!

MiniTest 650-650B-650E Coating Thickness Gauge

The MiniTest 650 rugged coating thickness gauge with a fixed external probe offering measurement of all non-magnetic coatings on steel and all insulating coatings on non-ferrous metals, Which is especially designed to work in rough environments as well as on abrasive surfaces, e.g. shot-blasted steel, plasma spray-coated surfaces and ideal tool for any measuring task in the finishing industry. The MiniTest 650 is designed in such way which makes it easy-to-handle and combines extended mechanical life on the one hand and high accuracy on the other hand to meet the requirements of any professional user in the shipbuilding, automotive, bridge building, construction or other industry.

MiniTest 650 F
To measure non-magnetic coatings (varnishes, enamels, chromium etc.) on ferromagnetic substrates (e.g. steel used in construction and for the auto body).
With statistics display (number of readings taken, mean values, standard deviation, maximum, minimum).
Measuring range 0 to 3 mm.
MiniTest 650 N
To measure insulating coatings (varnishes, enamels, anodic coatings etc.) on non-ferrous metals (aluminium, copper, brass etc.).
With statistics display (number of readings taken, mean values, standard deviation, maximum, minimum).
Measuring range 0 to 2 mm.
MiniTest 650 FN
To measure non-magnetic coatings (varnishes, enamels etc.) on ferromagnetic substrates (e.g. steel used in construction and for the auto body) and to measure insulating coatings (varnishes, enamels, anodic coatings etc.) on non-ferrous metals (aluminium, copper, brass etc.).
With statistics display (number of readings taken, mean values, standard deviation, maximum, minimum).
Measuring range 0 to 2 mm.
MiniTest 650 B-F
To measure non-magnetic coatings (varnishes, enamels, chromium etc.) on ferromagnetic substrates (e.g. steel used in construction and for the auto body).
Measuring range 0 to 3 mm.
With preset measuring units µm or mils.
Enables 1-point calibrations.
MiniTest 650 B-FN
To measure non-magnetic coatings (varnishes, enamels etc.) on ferromagnetic substrates (e.g. steel used in construction and for auto body) and to measure insulating coatings (varnishes, enamels, anodic coatings etc.) on non-ferrous metals (aluminium, copper, brass etc.).
Measuring range 0 to 2 mm.
With preset measuring units µm or mils.
Enables 1-point calibrations.
MiniTest 650 E-F
To measure non-magnetic coatings (varnishes, enamels, chromium etc.) on ferromagnetic substrates (e.g. steel used in construction and for the auto body).
Measuring range 0 to 3 mm.
With preset measuring units µm or mils.
MiniTest 650 E-FN
To measure non-magnetic coatings (varnishes, enamels etc.) on ferromagnetic substrates (e.g. steel used in construction and for the auto body) and to measure insulating coatings (varnishes, enamels, anodic coatings etc.) on non-ferrous metals (aluminium, copper, brass etc.).
Measuring range 0 to 2 mm.
With preset measuring units µm or mils.

For more details Please Request a quote now..!!

 

MiniTest 725-735-745 Coating Thickness Gauge

Devices in the MiniTest 725-735-745Coating Thickness Gauge with integrated sensor in MiniTest 700 series are the best sellers – and for good reason: they have diverse applications and deliver precise readings, all at unbeatable value for money.

Precision measuring instrument in 3 variants according to requirements:

MiniTest 725
The basic version with integrated sensor, a compact design and inexpensive.
Internal probe.
Saves up to 10,000 measurement values in 10 groups.

MiniTest 735
The standard version with the external sensor connected to the device by a cable to make measurement easy.
External, interchangeable probes connected via cable.
Saves up to 10,000 measurement values in 10 groups.

MiniTest 745
The flexible version with interchangeable sensors that can be connected to the device either by cable or wirelessly via Bluetooth for greater freedom when measuring coating thickness.
Interchangeable probes.
The probes can be connected internally as well as externally by cable and also without cable via Bluetooth.
Saves up to 100,000 measurement values in 100 groups.

The MiniTest 700 series are ergonomically designed and its rounded shape allows the MiniTest gauge to fit perfectly into the palm of your hand. It also features a measuring speed setting option that allows adjustment to changing requirements for utmost efficiency and optimum productivity: taking many readings in a short time with medium precision or taking only a few readings with increased accuracy.All three versions in this series enable the non-destructive measurement of coating thickness for non-magnetic coatings (paint, synthetic material, chrome and other electro-plated, non-magnetic coatings, etc.) on ferromagnetic substrates (steel/iron), and insulating coatings (lacquer, enamel, synthetic material, anodised aluminium, etc.) on conductive substrates (aluminium, copper, titanium, austenitic stainless steel).

In addition, all devices are capable of two different measurement methods:

Single mode: up to 70 readings per minute can be recorded and saved.

Continuous mode: up to 20 coating thickness values per second are recorded. This allows you, for example, to identify thinnest and thickest points and the saving of readings in a measurement series.

For more info Please Request a quote now..!!

MiniTest 70B Coating Thickness Gauge

The MiniTest 70B is a lightweight and handy coating thickness gauge of MiniTest 70 series in a pencil format with a built-in sensor. Its handy design make the operation easy and user friendly, this gauge is the ideal tool to measure any ferromagnetic substrates (e.g. steel) and also for non-ferromagnetic substrates (non-ferrous metals like aluminium, brass etc.), With user friendly features which allows users to select units of mils or microns. The spring-mounted sensors are equipped with wear-resistant sensor poles for measurements on rough and abrasive substrates.
This MiniTest 70B gauge is designed for measurement of insulating coatings and non-magnetic coatings such as paint, enamels, anodic films etc, on non-ferrous metal bases such as aluminium, copper, brass, etc, and for  ferro-magnetic bases such as constructional steel, car bodies, etc.

Models Available

MiniTest 70B-FN – Combination Ferrous & Non-Ferrous Model

Measuring range 0 to 3 mm / 118 mils on steel substrates and 0 to 2.5 mm / 95 mils on non-ferrous metals.
Enables 1-point calibrations.

Complete Kit
The MiniTest 70B Coating Thickness Gauge is delivered as a complete kit with:
– MiniTest 70B – Calibration foils
– Operating instructions
– Gauge tether
– Belt pouch

The MiniTest 70B Series provides accurate, non-destructive coating measurements on steel and non-ferrous metals.

For more details Please Request a quote now..!!

MiniTest 70E Coating Thickness Gauge

The MiniTest 70E is a pocket sized, lightweight and handy coating thickness gauge in a pencil format with a built-in sensor designed for easy operation, this gauge is the ideal tool to measure any ferromagnetic substrates (e.g. steel) and also for non-ferromagnetic substrates (non-ferrous metals like aluminium, brass etc.). With user friendly features which allows users to select units of mils or microns. The spring-mounted sensors are equipped with wear-resistant sensor poles for measurements on rough and abrasive substrates.
Designed for measurement of insulating coatings such as paint, enamels, anodic films etc, on non-ferrous metal bases such as aluminium, copper, brass, etc and for  ferro-magnetic bases such as constructional steel, car bodies, etc.

Models Available

MiniTest 70E-FN – Combination Ferrous & Non-Ferrous Model

Measuring range 0 to 3 mm / 118 mils on steel substrates and 0 to 2.5 mm / 95 mils on non-ferrous metals.
Complete Kit
The MiniTest 70E Coating Thickness Gauge is delivered as a complete kit with:
– MiniTest 70E-FN – Calibration foils
– Operating instructions
– Gauge tether
– Belt pouch

The MiniTest 70E Series provides accurate, non-destructive coating measurements on steel and non-ferrous metals.

For more details Please Request a quote now..!!