PFS Probe Fixture Stand

coating thickness gauge probes are incredibly accurate, especially the microprobe series. But fine, precise measurements on small parts are often affected by the operator. Our probe fixture removes adverse operator influence by fixturing both the probe and the part. This high-quality device is a must in any calibration lab.

Intended primarily for the straight (0 degrees) ferrous or non-ferrous microprobes, this stand can also be used with our conventional regular probes. It ensures that the part is brought up to the probe perpendicular to the part’s surface in a controlled, repeatable way.

The probe is fastened securely to the fixture using a ring-clamp, and the measuring platform is raised to the probe tip using the lever on the side of the fixture. The rising motion of the platform is smooth, providing a stable method of measuring the smallest parts.

For more info Please Request a quote now..!!


6000PRBEXTTelescopic Probe Extender is the lightweight, the portable device that increases the reach of PosiTector® 6000 regular cabled probes up to 124 cm (49″), ergonomically measuring overhead or underfoot. Includes a built-in mount for securing the PosiTector gauge body allowing for comfortable one-handed operation.

For more info Please Request a quote now..!!


PRBFOOTKIT-D Probe Foot Rings for PosiTector 6000 is ideal for use on thin, soft coatings. They protect coatings from unnecessary wear while using Scan or Fast mode to measure large objects. For use with all 6000-PROBES ‘regular’ and ‘right-angle’ separate probes FS, FRS, FTS, NS, NRS, FNS, FNRS. Pack includes 2 nylon foot rings, an instruction card, and a clear plastic case.

For more info Please Request a quote now..!!


The PosiTest-PC measures uncured powder coatings using non-contact ultrasonic technology to predict a cured thickness. The tester is ready to use right out of the box! 4x faster than the previous generation, the PositTest PC has a scan mode for continuous measurements, ideal for analyzing large areas.

For more info Please Request a quote now..!!

PosiTector® BHI

The new PosiTector® BHI Barcol Hardness Impressor is ideal for measuring the indentation hardness of soft metals (aluminum, aluminum alloys, copper, brass, etc.), harder plastics and fiber-reinforced plastics.

PosiTector body accepts all PosiTector BHI, SHD, 6000, 200, DPM, IRT, RTR, SPG, SST, and UTG probes easily converting from a hardness tester to a coating thickness gauge, dew point meter, infrared thermometer, surface profile gage, soluble salt tester, or ultrasonic wall thickness gauge.

The American-made impressor also features a durable field-replaceable indentor and aluminum alloy test disks with leveling plate to verify gage accuracy. Conforms to ASTM B648/D2583, DIN EN 59, and AS/NZS 3572.22.

Complete Kit:

The PosiTector BHI comes complete with test disks (2), glass plate, protective rubber holster with belt clip, wrist strap, 3 AAA batteries, instructions, hard shell carrying case, protective lens shield, Long Form Certificate of Calibration, USB cable, PosiSoft Software, two (2) year warranty.

For more info Please Request a quote now..!!


6000-PROBES Probes For Use With 6000 Series 

Spare / Replacement probes for 6000 Series Coating Thickness Gauges. All probes are supplied with a NIST Traceable calibration certificate.

For more info Please Request a quote now..!!


The PosiTector® SmartLink is a module that physically connects to new and existing PosiTector probes and wirelessly connects to a free PosiTector app available for iOS (iPhone, iPad) and Android, turning it into a virtual PosiTector gage.

Unprecedented Mobile Integration (no internet required). Take full advantage of the simplicity and utility of your smart device including touch screen, keyboard, microphone, camera, email, WiFi, Bluetooth, cellular, dictation tools, and more

Seamless Online Integration with an Internet Connection. Share, backup, synchronize and report measurement data via email, apps and the cloud

The PosiTector® SmartLink connects to ALL PosiTector 6000, RTR‐H, SPG and DPM probes manufactured after January 2006. The PosiTector SmartLink is not currently compatible with the PosiTector 200, PC or UTG probes

For more info Please Request a quote now..!!

Positector 200

PosiTector® 200 Coating Thickness Gauge for drywall, concrete, wood, plastic, composites, and more.

It measures coating thickness on drywall, concrete, wood, plastic, and more using ultrasound technology. Advanced model can measure up to 3 individual layer thicknesses in a multi-layer system and features a graphic readout for detailed analysis of the coating system.

Models-PT-200B-S, PT-200B-A, PT-200C-S, PT-200C-A, PT-200D-S, PT-200D-A
3 Ranges Available in Standard or Advanced Versions
200B – 0.5 – 40 mils (13 – 1000 µm) paint on plastic, sheetrock, wood
200C – 2 – 150 mils (50 – 3800 µm) coatings on concrete, fiberglass
200D – 2 – 300 mils (50 – 7600 µm) polyurea on concrete and other thick coatings

On-Screen Statistics – continually displays/updates average, standard deviation, min/max thickness, and number of thickness readings

For more info Please Request a quote now..!!

6000FNDS Series

The PosiTector 6000® FNDS includes an Advanced body and regular cabled FNDS probe for measuring the individual thicknesses of both the paint and the zinc layers in a duplex coating system with a single reading. Duplex coating systems use a combination of two corrosion protection systems – typically paint or powder coating over galvanized steel (hot-dip, electro, or zinc spray metalizing). The resultant corrosion protection is superior to either protection system used independently.

Range: 0 – 1500 µm
Minimum Zinc Thickness: 13 µm
Paint Layer Accuracy: +(1 µm + 1%)  0 – 50 µm /  +(2 µm + 1%)  > 50 µm
Zinc Layer Accuracy: +(2 µm + 1%)  0 – 50 µm / +(4 µm + 1%)  > 50 µm
Temperature: up to 49° C

The PosiTector 6000 FNDS probe is designed to measure individual layer thicknesses of zinc and paint/powder in a duplex coating system with a minimum zinc layer thickness of 13µm.

For more Info Please Request a quote now..!!

6000GS Coating Thickness Gauge

The coating thickness gauge PosiTector 6000GS is a hand-held, electronic precise, rugged tester designed for non-destructive measurement of very thick coatings on ALL metals accurately and quickly using magnetic and eddy current principles.
Ideal for measuring ship hull coatings and thick intumescent paints.

Range: 0 – 63,5 mm
Accuracy:+/- (0.2 mm + 3%)
Minimum Surface Area: 254 x 254 mm
Minimum Substrate Thickness: 5 mmSubstrates:= Coatings on Ferrous metals (Steel & Cast Iron)
N= Coatings on Non-Ferrous metals (Aluminium, Copper, etc)
FN= Combination: Coatings on All Metals

The 6000GS is available in Standard (1) or Advanced (3) configuration.
The Standard(1) model has a monochrome display, 250 reading memory, and USB data output.
The Advanced(3) model adds a high contrast color LCD display, Scan Mode, Real-Time Graphing Bluetooth output, and more.

For more info Please Request a quote now..!!