DT-311J Splashproof Digital Stroboscope – AC Powered

LIMITED RANGE
200-1.500 RPM/FPM

The DT-311J digital stroboscope with its IP65 protection code is designed for use in the harshest manufacturing environments.

The stroboscope is perfect for observing fast repeated motions and for determining RPM or inspection and observation of moving parts by “freezing” or “slowing down” the action.

The DT-311J can be triggered by means of an external sensor (power supply for the sensor is provided by the stroboscope). The flashes can be delayed either in time or in rotation angle.

For more info Please Request a quote now..!!

DT-361 High-Intensity LED Stroboscope

The DT-361 High-Intensity LED Stroboscope is a velocity analyzing and measuring device that is ideal for machinery process inspection.

The DT-361 Stroboscope is capable of flashing its LED lights in a synchronous frequency to the operating machinery, creating the illusion of viewing slowed or frozen images. Utilizing this phenomenon of slowing or stopping the motion with the adjusted flash rate of its LED lights, machine parts, and processes may be inspected for defects, aiding in preventative maintenance programs.
The DT-361’s LED technology extends operation due to the low energy requirement of the light diodes compared with xenon stroboscopes. Maintenance time and downtime is reduced since there is no need to replace the bulb typical of xenon lit stroboscopes.
The light output (Lux) of the LED array is far brighter than not only xenon powered stroboscopes, but all comparable LED stroboscopes on the market.

Typical applications for using the DT-361 are to determine speeds, inspect rotors, meshing gears, vibration diagnostic equipment, textile equipment, printing production lines, industrial fan inspection, and many more.

The DT-361 has a vibrant red LED display that is ideal for viewing in dark locations. The simple to use keypad plus rate adjustment dial aids in making quick changes of the flash rate to coincide with changes in the speed of your process. The dial allows fine-tune altering of the flash rate while the x2/÷2 keys enable large spanning over the entire flash range.

The DT-361 has the added feature of modifying the flash duration or on time which aids in picture clarity often necessary in printing processes. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section of the machinery.
The DT-361 is also capable of being synchronized with an input signal. To complete the system, the DT-361 has a power output to supply an input sensor if desired. The robust aluminum housing is NEMA4X (IP65) protected allowing usage in many harsh plant environments.

The DT-361 stroboscope is only available with a US plug and is not CE certified.

For more info Please Request a quote now..!!

DT-365/365E

High-Intensity, Battery Powered LED Stroboscopes. The DT-365 and DT-365E High-Intensity, Battery-Powered LED Stroboscopes are velocity analyzing and measuring devices that are ideal for machinery process inspection.

The DT-365 and DT-365E Stroboscopes are capable of flashing their LED lights in a synchronous frequency to the operating machinery, creating the illusion of viewing slowed or frozen images. Utilizing this phenomenon of slowing or stopping the motion with the adjusted flash rate of its LED lights, machine parts, and processes may be inspected for defects, aiding in preventative maintenance programs.

Models Available
DT-365 (18 LEDs)
DT-365E (6 LEDs)

The DT-365 & DT-365E have the added feature of modifying the flash duration or on time which aids in picture clarity often necessary in printing processes. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section of the machinery. These stroboscopes are also capable of being synchronized with an input signal. To complete the system, the DT-365 has a power output to supply an input sensor if desired. The robust aluminum housing is NEMA-4X (IP65) protected allowing usage in harsh plant environments.

Typical applications for the DT-365 and DT-365E
Determine speeds, inspect rotors, meshing gears, motors, textile equipment, printing production lines, conveyors, industrial fans, pump operation, vibration equipment diagnostics, and many more.

For more info Please Request a quote now..!!

DT-326B light weight LED Stroboscope

This  LED Stroboscope DT-326B is a lightweight and battery-powered handheld stroboscope. It provides an accurate and stable flash. The innovative design allows a longer flash tube life, with a longer life than traditional xenon flash tubes. This handy LED Stroboscope has a rechargeable lithium battery, with one charge cycle lasting up to 12 hours.

The DT-326B is designed for speed and frequency measurements in motion and vibration analysis applications. It is ideal for a number of maintenance applications in many different industries such as the printing, packaging, textile, automotive, cable, mining, steel, chemical, optics, medical and marine industries.

For more info Please Request a quote now..!!

LS-18-LED

The new model LS-18-LED Linear Strobe is designed for fixed-mounting on a wide variety of machinery and for various visual inspection tasks. It utilizes 200 high-performance LEDs arranged in a 25 x 8 array to produce a bright/sharp image with a uniform light distribution for web widths up to 20″ (500mm) and wider. For wider coverage, two (2) or more Strobes can be combined in a Master/Slave arrangements using an interconnect cable to transfer the trigger signal from one to the other for perfect synchronization.

The LS-18-LED uses the industries’ latest high-performance LEDs to provide lifetime use, never requiring replacement. Their whisper-quiet operation and superb light intensity and uniformity make this linear stroboscope suitable for use in the toughest production environments and for a wide range of measurement, observation, and inspection functions.

LS-FCM Flash Control Module
A simple and inexpensive unit for controlling flash frequency. You simply insert this small control unit into one of the two inputs on the reverse side of the strobe.

LS-SCU Strobe Controller
For adjusting the flash frequency, phase shift, delay time, and trigger divider. This unit is connected to the stroboscope by cable and provides the convenience of remote control if the stroboscope out of the line of sight or reach of the operators.

Typical applications include those in the printing, steel processing, and label-printing industries.

For more info Please Request a quote now..!!

LS-9-LED/LS-9-LED-WB

The new LS-9-LED is a high-performance stationary LED-stroboscope with powerful light output and uniform light distribution over a large area for use on web-widths up to 500mm (20 inches) and wider.

High light output
Due to the use of 120 of the industry’s latest high-performance LEDs, the LS-9-LED offers a powerful light intensity. The large, homogenous illumination surface delivers superb results even at difficult light conditions, making the LS-9-LED suitable for a very wide range of measurement, observation, and inspection functions. It is especially suitable for demanding applications, such as those in the printing industry.

LS-9-LED-WB – Wide-Body Housing
We deliver a special configuration of the LS-9-LED Linear Stroboscope packaged in 440 mm width housing (17.3 inches) designed to provide a more aesthetically-pleasing solution when the strobe is fixed-mounted on a machine frame that is 18 inches or wider (460 mm+).

The 120 LEDs are spread in three (3) separate “clusters” each containing 40 LEDs, arranged in a 5×8 array. The position of each “cluster” is optimized to provide the optimal light uniformity over the entire illumination area with the same effective brightness as the standard version of the LS-9-LED (7500 Lux, peak). This model is popular with OEM Machine Manufacturers of Slitter/Rewinders and similar machines used in the label and printing industries.

For more info Please Request a quote now..!!

LS-5-LED

The LS-5-LED is a high-performance LED stroboscope. It produces a bright and sharp image and uniform light distribution for web widths up to 12″ (300mm) and wider.

High light output
80 high-performance LEDs provide powerful light intensity. The large, homogenous illumination surface delivers superb results in difficult light conditions, making the LS-5-LED suitable for a wide range of measurement, observation, and inspection functions, especially for demanding applications, such as those in the printing industry.

Superb image sharpness
Adjustable flash duration from 1 to 1000 microseconds, allows you to easily find the best combination of light intensity and sharp images for every application.

Flexible adjustments for all applications
Alternatively, the stroboscope can be controlled directly by the trigger signal of your system without the need for additional control units or by various strobe control devices. When using these trigger options simultaneously, you can easily alternate between the signal inputs.

Additional control options LS-FCM
A simple, inexpensive device for controlling flash frequency. Simply insert the controller into one of the sockets on the reverse side of the device.

For more info Please Request a quote now..!!

LS-3-LED

The new LS-3-LED is a high-performance LED stroboscope designed for inspection of webs up to 10″/25cm. Built-in strobe control allows for easy adjustment of flash rate, brightness, phase, and more. External input allows syncing the strobe with a remote sensor.

Complete Kit
The LS-3-LED is supplied with the strobe, universal AC adapter with USA, EURO, and UK plugs and DIN Connector (for use when externally triggering from the sensor).

The LS-3-LED features a rugged aluminum housing with forty, high-performance LEDs providing a peak brightness of 5000 Lux and convenient adjustment of flash duration to easily select the optimal balance of brightness and image sharpness. It is supplied with a universal battery charger (100-240VAC) with USA, Euro, and UK plug adapters.

For more info Please Request a quote now..!!

NS-600/NS-601

The NS-600/NS-601 LED stroboscope is designed to measure the speed of a rotating object or one that is cycling in a linear repetitive pattern ….. without contact or reflective tape. When the flash rate and rpm rate are identical, the target will appear frozen” visually. If the flash rate adjusted slightly, the target would be put into slow motion for detailed motion analysis, observation, or trouble-shooting.

Complete Kit
The NS-600 LED stroboscope is supplied as a complete kit including the strobe, 2 AA batteries, instruction manual, and calibration cert in a fitted carrying case.
Ranges & Resolution
6.0 to 9999.9 fpm/rpm
±0.1 fpm/rpm
10000 to 120000 fpm/rpm
±1 fpm/rpm (over 100,000 display flashes)
.20 ~ 999.00 Hz
0.01 Hz
1000.0 ~ 2000.0 Hz
0.1 Hz

The NS-600/NS-601 features a rugged cast-Aluminum housing, the latest LED technology, and compact size making it a perfect choice for use anywhere on the factory floor. The NS-600/NS-601 is ideal for speed, motion, and vibration analysis, such as rotating shafts, fans, cams, etc.

For more info Please Request a quote now..!!

ESL-200

The ESL-200A is a super bright, handheld, fully-featured LED stroboscope in a compact design. The ESL-200A LED stroboscope is designed to measure the speed of rotating or cycling linear motion objects without contact or reflective tape, as well as freeze motion visually.

Complete Kit
The ESL-200A is supplied in a foam-fitted carrying case with LED Stroboscope, Universal AC-Adapter/Charger, instruction manual, and NIST-Traceable Calibration Certificate.

The ESL-200 is an ideal inspection strobe for speed, motion, and vibration analysis, such as rotating shafts, fans, cams, etc. Lifetime LED lights using pulse width modulation, encased in an aluminum housing and powered by a NiMH rechargeable battery, make this pocket strobe extremely durable and capable of high flash rates.

For more info Please Request a quote now..!!