DT-5TXR Panel Mount Tachometer

The DT-5TXR Panel Mount Tachometer with optional output Modules is an economical unit for speed and process time monitoring when combined with a compatible in-line sensor. Loaded with features found in more expensive units, the DT-5TXR Panel Meter is extremely versatile with selectable inputs.

The DT-5TXR is fully scalable and possesses three selectable modes allowing it to measure RPM/linear speed/rate, elapsed time, and process time. Each panel meter accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square waves such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors, and NPN OC transistors.

Models Available
DT-5TXR
Panel Meter with Output Module Capability, Selectable inputs, 100-240 VAC Power
DT-5TXR-DC
Panel Meter with Output Module Capability, Selectable inputs, 9-35 VDC Power

Typical applications can range from machining operation timing, rate of change monitoring such as on a conveyor, an elapsed time of oven curing, etc. with any variety of compatible sensor inputs desired. The DT-5TXR panel meter also accepts various output modules, enabling it to output data for analysis, record keeping or assist in controlling the process through a separate control device. Up to two modules can be accepted simultaneously, offering an enormous number of combinations and options.

Please contact us for pricing and availability..!!

DT-501X Panel Meter Tachometer

The DT-501X Panel Meter Tachometer with optional outputs is a multi-faceted instrument ideally designed for speed, rate, or time monitoring applications when combined with a compatible process speed sensor.

With its industry-leading 0.87” (22 mm) height display and a compact body depth of only 3.6″ (92 mm), the DT-501X allows mounting in tight panels or small enclosures. Added versatility is offered with its range of standard inputs which include NPN, contact, and square or sine wave signals produced from devices such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors, rotary encoders, and NPN OC transistors.

Models Available
DT-501XA
Panel Meter Tachometer, 100-240 VAC Powered
DT-501XA-FVT
Panel Meter Tachometer, 100-240 VAC Powered, Analog Output with Terminal Block Connection
DT-501XA-CPT
Panel Meter Tachometer, 100-240 VAC Powered, Relay Output
DT-501XA-TRT
Panel Meter Tachometer, 100-240 VAC Powered, NPN Open Collector Output
DT-501XA-CPT-FVC
Panel Meter Tachometer, 100-240 VAC Powered, Relay Output, Analog Output with 36 Pin Connection
DT-501XA-TRT-FVC
Panel Meter Tachometer, 100-240 VAC Powered, NPN Output, Analog Output with 36 Pin Connection
DT-501XD
Panel Meter Tachometer, 9-35 VDC Powered
DT-501XD-FVT
Panel Meter Tachometer, 9-35 VDC Powered, Analog Output with Terminal Block Connection
DT-501XD-CPT
Panel Meter Tachometer, 9-35 VDC Powered, Relay Output
DT-501XD-TRT
Panel Meter Tachometer, 9-35 VDC Powered, NPN Open Collector Output
DT-501XD-CPT-FVC
Panel Meter Tachometer, 9-35 VDC Powered, Relay Output, Analog Output with 36 Pin Connection
DT-501XD-TRT-FVC
Panel Meter Tachometer, 9-35 VDC Powered, NPN Output, Analog Output with 36 Pin Connection

The DT-501X is fully scalable and possesses four selectable modes allowing it to measure various process speeds, rates, and times: a tachometer, flowmeter, process time span, and elapsed time mode which displays the inverse to the input signal, common in oven conveyor applications.

Please contact us for pricing and availability..!!

 

MiniVLS 313 USB Laser Speed Sensor / Tachometer

MiniVLS 313 USB Laser Speed Sensor / Tachometer

The MiniVLS 313 is a laser speed sensor with USB output for sending data directly to a PC or Android device.

In the Box
Instruction Manual
MiniVLS 313 Speed Sensor USB Laser Tachometer
Reflective Tape
USB 3.1 Type C Male to USB 2.0 Type A Female Socket Adapter with OTG
OTG USB On The Go Host Adapter Cable USB A Female to Micro B Black
USB 2.0 to mini-B 5 pin Cable

Please contact us for pricing and availability..!!

MiniVLS 211/ia

The MiniVLS 211/ia Intrinsically Safe Optical Speed Sensor has is Ex-II 1G Ex ia op is IIC T4 Ga (-20°C < Ta < +40°C) certified.

The certification level allows for use in a wide range of hazardous environments in petrochemical, Gas and volatile materials processing industries, ideally suited for Condition Monitoring, Data collectors in balancing applications, these sensors give excellent performance with repeatable results, engineered for easy mounting with the optional Mounting Bracket and Mini Tripod Stand in handheld applications.

Please contact us for pricing and availability..!!

MCS-625 Photo Reflective Sensor

MCS-625
Photo Reflective Sensor

Consists of a LED infra-red light source sensing device and amplifier contained in a heavy-duty housing. For initial alignment purposes, a small indicator lamp is mounted at the top of the sensor housing.

The MCS-625 has an open collector output and requires a pull-up resistor.

Please contact us for pricing and availability..!!

MCS-655 Photo-Reflective Speed Sensor

MCS-655
Photo-Reflective Speed Sensor

The MCS-655M is a photo-reflective NPN open collector photosensor with Light/Dark activated output that operates up to 1000 Hz.

For simplified installation purposes the integral LED aids in the MCS-655M model comes in a robust metal housing with a connection cable, LED status indicator, sensitivity control, and mounting nuts.

Models Available
MCS-655M
Retro-Reflective Speed Sensor with Metal Housing
MCS-655P
Retro-Reflective Speed Sensor with Plastic Housing

Please contact us for pricing and availability..!!

LS-S50MLR Photo Reflective Sensor

LS-S50MLR is a laser sensor that can be taught to recognize the difference in colors. It is a class 1 red laser with a switching frequency of 1.5KHZ. Contained in a metal housing with 6ft of cable, which can be utilized for different operations including stroboscopes, counters, and panel tachometers.

It includes a trimmer potentiometer that is located on the side for minimum and optimum sensitivity adjustments. It can be used in normally closed or normally open operation, NPN type of output, with a yellow LED for signal indication and a green LED for power.

It also includes a mounting bracket.

Please contact us for pricing and availability..!!

RE1B Rotary Pulse Generator

RE1B-60F
Single logic output (Logic “1” …supply voltage minus 2.5 V or more, 10 mA (max)) 60 digital output pulses per shaft revolution. Maximum speed: 5000 rpm. 10′ (3m cable)

RE1B-600F
Single logic output (Logic “1” …supply voltage minus 2.5 V or more, 10 mA (max)) 600 digital output pulses per shaft revolution. Maximum speed: 3000 rpm. 10′ (3m cable)

RE1B-1000F
Single logic output (Logic “1” …supply voltage minus 2.5 V or more, 10 mA (max)) 1000 digital output pulses per shaft revolution. Maximum speed: 1800 rpm. 3′ (.91m cable)

RE2B-30F
Dual logic output (90° out of phase) for quadrature applications. (Logic “1” …supply voltage minus 2.5 V or more, 10 mA (max) / Logic “0”… less the 0.4 V, 30 mA max.) A zero position output for shaft position reference. 30 digital output pulses per shaft revolution. Maximum speed: 5000 rpm. 10′ (3m cable)

RE2B-60F
Dual logic output (90° out of phase) for quadrature applications. (Logic “1” …supply voltage minus 2.5 V or more, 10 mA (max) / Logic “0”… less the 0.4 V, 30 mA max.) A zero position output for shaft position reference. 60 digital output pulses per shaft revolution. Maximum speed: 5000 rpm. 10′ (3m cable)

RE2B-600F
Dual logic output (90° out of phase) for quadrature applications. (Logic “1” …supply voltage minus 2.5 V or more, 10 mA (max) / Logic “0”… less the 0.4 V, 30 mA max.) A zero position output for shaft position reference. 600 digital output pulses per shaft revolution. Maximum speed: 3000 rpm. 1.6′ (.49m cable).

Please contact us for pricing and availability..!!

MCS-3109 Proximity Sensor

MCS-3109 Proximity Sensor

The MCS-3109 is complimentary (NPN-NO and NPN-NC) proximity sensor normally used in high-vibration areas and where a greater sensing distance is required.

Please contact us for pricing and availability..!!

SE-G2 Proximity Sensor

The SE-G2 (formerly SE-G) is a solid-state proximity switch designed for gear sensing. The SE-G2 gear sensor will provide a square wave signal output and indicate detection via an LED indicator on the rear of the unit.

The maximum switching frequency is 8 kHz with a maximum sensing distance of 1.0 mm, the gear pitch must be between 25.4 (min) and 16.93 (max).

Please contact us for pricing and availability..!!