FH Series

FH Series ElektroPhysik MiniTest 7200 and 7400 FH Magnetic Wall Thickness Gauge for PET Plastic and Glass Cont
The FH Series provides easy, non-destructive, and highly accurate thickness measurements on all types of non-ferrous products, regardless of their size, shape, and material.

Models Available
FH7200
offers measurement capabilities including real-time thickness measurement, display of minimum and maximum readings, an offset mode, and automatic storage of up to 100,000 values.
FH7400
offers the same capabilities as the MiniTest 7200 FH plus statistical graphing, real-time trend, database with up to 200 batches, and increased automatic storage of up to 240,000 values. e.g. 1200 per batch.

Choice of five probes
FH4
0 – 6 mm (0 – 0.236″)
FH4-1MM
0 – 6 mm (0 – 0.236″)
FH4-M
0 – 9 mm (0 – 0.354″)
FH10
0 – 13 mm (0 – 0.512″)
FH10-M
0 – 24 mm (0 – 0.945″)

The FH7200 & FH7400 is a portable thickness measuring device that offers the capability to precisely measure materials up to 10 mm thick. The small size and portability of the device enable it to be operated in production areas and quality laboratories.

Complete Kit

The FH7200 and FH7400 Gauges are supplied as a kit including, Gauge, Multi-language Operating Instructions, four (4) AA batteries, Protective Rubber Shell withstand and belt clip, Magnetic Screw Driver and MSoft7 Pro Software on USB stick all supplied in a foam-fitted hard plastic carrying case.

Probes are required for measuring and are sold separately.

The following accessories will be supplied based on the Probe Type purchased.

FH4 Probe
– Magnetic Probe Protection sleeve and end cap
– Spring-loaded probe holder / Table stand
– Non-Magnetic Balls; 1.5mm (100 pcs), 2.5mm (100 pcs) and 4.0mm (50 pcs)
– Zero calibration tip for 1.5mm, 2.5mm, and 4.0mm balls
– Calibrations Standards: 0.25mm / 1mm / 3mm

FH4-1MM Probe
– Magnetic Probe Protection sleeve and end cap
– Spring-loaded probe holder / Table stand
– Non-Magnetic Balls; 1.0mm (100 pcs), 1.5mm (100 pcs), 2.5mm (100 pcs) and 4.0mm (50 pcs)
– Zero calibration tip for 1.0mm, 1.5mm, 2.5mm, and 4.0mm balls
– Calibrations Standards: 0.15mm, 0.25mm, 1mm and 3mm

FH4-M Probe
– Magnetic Probe Protection sleeve and end cap
– Spring-loaded probe holder / Table stand
– Non-Magnetic Balls; 1.5mm (100 pcs), 2.5mm (100 pcs), 4.0mm (50 pcs)
– Magnetic Balls; 1.5mm (25 pcs) and 3.0mm (20 pcs)
– Zero calibration tip for 1.5mm, 2.5mm, 3.0mm, and 4.0mm balls
– Calibrations Standards: 0.25mm, 1mm, 3mm, and 8mm

FH10 Probe
– Magnetic Probe Protection sleeve and end cap
– Spring-loaded probe holder / Table stand
– Non-Magnetic Balls; 2.5mm (100 pcs), 4.0mm (50 pcs), 6.0mm (25 pcs) and 9.0mm (10 pcs)
– Zero calibration tip for 2.5mm, 4mm, 6mm, and 9mm balls
– Calibrations Standards: 1mm, 3mm, and 8mm

FH10-M Probe
– Magnetic Probe Protection sleeve and end cap
– Spring-loaded probe holder / Table stand
– Non-Magnetic Balls; 2.5mm (100 pcs), 4.0mm (50 pcs), 6.0mm (25 pcs)
– Magnetic Balls; 4.0mm (20 pcs), 6.0mm (20 pcs) and 9.0mm (10 pcs)
– Zero calibration tip for 2.5mm, 4.0mm, 6.0mm, and 9.0mm balls
– Calibrations Standards: 1mm, 3mm, 8mm, and 18mm

Please contact us for pricing and availability..!!